HBLQ-17/50KV MOV Bushing Surge Arrester

HBLQ-17/50KV MOV Bushing Surge Arrester provide a reliable protective medium voltage network, using the semi-conductive shield to make sure the person is safe and the equipment can work well, also they have the high quantity to make sure they can work in the Circumstances. The 17/50kV M.O.V Bushing Surge Arrester can be use together with the T back connector.

Scope of supply

MOV bushing arrester

Two-head screw

Insulator

Clear paper

Silicone lubricant

Test report

Installation instructions

Quality certification

Product structure
1. Insulation layer: Unique formula and mixing technology ensure the high quality of prefabricated EPDM insulation rubber.
2. Outer semi-conductive layer: Prefabricated EPDM conductive rubber, in line with IEEE592 standard.
3. Arrester core: It is composed of zinc oxide arrester valve plate treated by special process.
4. Copper bottom cover: The copper bottom cover is tightly combined with the outer conductive layer of the arrester, making the arrester effectively waterproof and providing a grounding point for the arrester.
5. Grounding wire: The grounding wire at the lower end of the arrester is used to effectively connect the lightning impulse voltage to the grounding position.
6. Inner semi-conductive layer: Prefabricated EPDM conductive rubber, effectively controlling electrical stress.
7. Stud bolts; tinned copper bolts ensure a tight fit between the conductor and the casing.
8. Insulator end cap: Make the product insulated and sealed.