JB-35kV 630A Shielded Separable Connector

JB-35kV 630A Shielded Separable Connector provides a fully screened and fully submersible connection when mated with the proper bushing or plug. For connection of polymeric cable to transformers, switchgear, motors and other equipment with a premoulded separable connector, Optional capacitive test point allows for an eas check of the circuit status or installation of a fault indicator.

These 35kV 630A Shielded Fore-Connector are made by EPDM with the good quality.

Scope of Delivery

• Shielded End-Connector
• Insulation
• Conductor cable lug
• Adaptor
• Two head screw
• Clearing Paper
• Silicone Lubricant
• Installation Instruction Sheet
• Quality Certificate

Inference Information

Product Structure

1. SEMI-CONDUCTIVE SHIELD NSERT: Semi-conductive insertis molded ofsemi-conductive EPDM and controls electrical stresses at nose of mating loadbreak product.

2. EPDM INSULATION: High guality sulfur cured EPDM insulation is mixed and formulated in-house for complete controlofinsulating rubber characteristics

3. SEM-CONDUCTIVE INSERT: Moulded EPDM conducting rubber screen controls electrical stress

4. GROUNDING EYE: Moulded into the external screen for connection ofan earthing wire.

5. STRESS RELIEF: The configuration of the outer screen and the cable adapter provide cable stress relief

6. CONDUCTOR CABLE LUG: Aluminum compression connector is sized to ensure a cool running connector with maximum current transfer.

7. INSULATING PLUG: Molded epoxy insulating plug provides excellentelectrical, thermal and mechanical reliability

8. TWO HEAD SCREW: To make sure have a good contact with the apparatus bushing.

Application Example